05
2026
-
10
Iterative development of track structures for sliding profiles, enhancing the sealing and drainage performance of sliding doors and windows.
Push-pull profiles rely on the combination of track, light frame, hook frame, and upper and lower parts to realize the horizontal sliding opening of the window sash.
Push-pull profiles rely on the combination of track, light frame, hook frame, and upper and lower parts to realize the horizontal sliding opening of the window sash. The track is the core unit of the push-pull profile. The structural design directly determines the push-pull feel, drainage capacity, and sealing effect. The 80 and 88 series profiles rely on the differences in track width and cavity layout to form gradient products that are suitable for scenes such as balconies and large lighting openings.
The tracks are divided into single-track, double-track, and three-track layouts. The double-track structure can accommodate two movable window sashes, which is a commonly used form for residential balconies; the three-track structure can arrange two movable sashes plus independent screen sashes at the same time, making the ventilation combination more flexible. The high and low rail ribs are the key design for retaining water. The outer high ribs prevent rainwater from directly entering the track cavity, while the inner low ribs facilitate traffic and reduce collisions when people enter and exit. A diversion slope is integrally formed inside the track cavity. After rainwater falls into the cavity, it flows along the slope to the drainage hole and is quickly discharged to reduce water accumulation. The 88 series widened track profile has a wider base and stronger structural stability. It can carry heavier multi-layer insulating glass and is suitable for large-sized floor-to-ceiling windows.
Hook and light are the key profiles for window sash docking. When the two sliding windows are closed, they rely on the hooks to bite each other. The butt surfaces of the hooks are reserved for sealing slots and equipped with sealing strips. After closing, the strips fit together to fill the gap between the fans and weaken the air convection. The light frame acts as the side frame of the window sash and cooperates with the outer frame profile to control the sliding gap of the window sash. The gap needs to be controlled within a reasonable range. If the gap is too large, it will easily leak air and water, and if the gap is too small, it will cause push-pull jams. Reinforcing ribs are added inside the profile to improve the bending resistance of the profile. Large-size window sash is pushed and pulled repeatedly for a long time, making it less prone to bending and deformation of the profile.
There are obvious differences between the sealing system of push-pull profiles and open profiles. There is a movement gap in the sliding structure itself. The industry uses multiple sealing structures to make up for the airtight shortcomings. Multiple sets of sealing strips are installed at the overlapping position of the frame and sash and the docking position of the hook and enterprise. Some upgraded styles use co-extruded strips. The strips and profiles are integrally formed to reduce the later assembly process and reduce the risk of the strips falling off. The track surface has been precision machined to ensure flatness and reduce the rolling friction resistance of the pulley, making the pushing and pulling process smooth and labor-saving, and reducing the wear rate of the pulley.
The profile notches are standardized and adapted to accessories such as pulleys and locks. The bottom pulley is installed in the lower frame cavity. The load-bearing pulley carries the entire weight of the window sash. The flat track base surface of the profile can extend the service life of the pulley. The lock seat slot is pre-formed and equipped with a push-pull lock to fix the window sash after closing, improving the safety of use. The advantage of sliding profiles not occupying indoor opening space makes them uniquely competitive in large opening scenes. The continuous optimization of the track structure continues to narrow the airtight gap between sliding doors and windows and casement doors and windows.
Related news